Units 19-20 Whitworth Road

Washington, NE37 1PP

}

Mon - Fri 8.30 - 5.00

Saturday & Sunday CLOSED

w

Sales Department

Units 19-20 Whitworth Road

Washington, NE37 1PP

}

Mon - Fri 8.30 - 5.00

Sat & Sun CLOSED

w

Sales Department

Make a 3D logo on a CNC Router

Make a 3D logo on a CNC Router

Make a 3D logo on a CNC Router In this new tutorial we will show you how to make a 3D logo on a CNC router using black MDF 19mm (Velcromat).  At the very end of this tutorial you will also be able to download the source file (Vectric V Carve Pro) for your convenience....
How to make custom toolbox foam inserts on a CNC Router

How to make custom toolbox foam inserts on a CNC Router

How to make custom toolbox foam inserts on a CNC Router?   In todays tutorial installment we will be showing you how we produced this custom tool box insert using one of our Piranha CNC routers.  We will run through the material type, tools used and the relevant...
Use Your CNC  Router To Make A Folded Panel Sign Tray

Use Your CNC Router To Make A Folded Panel Sign Tray

Project number 2:  Use Your CNC Router To Make A Folded Panel Sign Tray? In this new ‘how to’ tutorial we will show you how to produce a simple folded panel out of aluminium composite material that can then be folded by hand.  The final example also has...
How to make a staircase stringer on a CNC Router

How to make a staircase stringer on a CNC Router

Welcome to part one in the Radecal Learning Academy series – do you need to know how to produce a simple staircase, folded composite panels for signs, stencil cut panels and much more? We at Radecal can help you create new products which can be used within your...
Vectric V Carve Pro Tutorial – How to create a simple  offset.

Vectric V Carve Pro Tutorial – How to create a simple offset.

How to create an offset in Vectric V Carve Pro for CNC routing.   Do you want to know how to create a simple offset in Vectric V Carve Pro?  We can show you how with this very simple to follow video below: What is Vectric V Carve Pro? We include Vectric VCarve Pro as...
How to get your settings right when using a CO2 Laser Cutter

How to get your settings right when using a CO2 Laser Cutter

Using a laser cutter for the first time (or even after training) can be a little daunting, it doesn’t have to be we can show you how.  Firstly lets talk about how they operate. Most laser cutter engravers (CO2) use a power supply, glass laser tube and a...